Kevipol® SGG-10
       
    Introduction : This is highly modified Hydroxypropyl Guar Gum for printing of Acid dyes on Cotton, Silk,
  Polyamide & their blends. Printing paste of Acid dyes can be prepared from KEVIPOL® SGG-10.
          
    Appearance : Light Yellow to Beige Powder.
       
    Color : Light Yellow to Beige Powder.
       
    Nature : Non-ionic.
        
    Solubility : Cold water Soluble
       
    PH : 7.0 to 8.50
       
    Moisture : 10% ( Maximum )
       
    Viscosity : 30000 ± 2000 cps in 10% solution (spindle no 6, 20 rpm at 25ºC)
       
    Ash Content    : 25% Max
       
    Hydration Time : 3 to 4 hrs. of high speed stirring of ½ hours.
       
    Preservative : Preservative added to increase storage stability of powder and paste. The product is PCP free.
       
    Advantages : Use of Kevipol SGG-10 offers sharp and level prints with better Colour value.
: It has good wash of properties.
: When used gives chock free screens.
        
    Preparation : Kevipol SGG-10 10
: Water 90
        100
      : Under high speed stirring slowly add weighed amount of powder.
  Avoid Lump formation.
  Stirr for 30 min and leave the stock paste for 3-4 hours for hydration.
       
    Packing : 25 kgs HDPE Laminated Paper bags with PE lining.
       
    Storage   : Sealed bags under normal condition for 6 month.

 

Home | About Us | Products | Quality | Contact